Alpine 30MC 3-Inch Midrange Component Speakers

  • (2) 3-inch Speakers
  • High-Strength Cast Aluminum Basket
  • Polypropylene Cone
  • Rubber Surround

Sound Garage, your Car Stereo Specialist in Brisbane's Northern Suburbs.



Alpine 30MC

3-Inch Midrange Component Speakers

The Alpine 30MC 3-Inch Midrange Component Speaker can be installed in most 2-way component systems to capture midrange frequencies and elevate the vehicle’s sound system performance.

Alpine 30MC


Often in a 2-way component system, there’s a dip in the midrange frequencies reproduced between the door speaker and where the tweeter crosses into the passband. This can cause the music to miss most of the instruments and vocals that are found in the midrange frequency.
The Alpine 30MC Midrange Component Speaker captures the higher midrange frequencies by integrating a dynamic third dimension into the sound system that seamlessly blends between the door speaker and tweeter. This brings the vocal element up, setting the vehicle’s sound stage to the optimal position of front and center.

Alpine 30MC


Build your Perfect Sound System

the Alpine 30MC is the "cherry on top" for sound system builders looking for high-quality performance. The Alpine 30MC is a perfect power match for Alpine's X, R and S series sound system. Add a dynamic third component into an existing 2-way component system for higher-quality and richer music experience.



The Alpine 30MC includes two small and sleek speakers that measure 3-inches with a mounting depth of 1 5/16-inch. The slim mounting depth allows for easy installation into most vehicle applications.
While this product is not a “direct-fit” solution for any vehicle (some installation may require vehicle-specific adapter plates) it can be professionally installed in a dash, A-pillars, or doors to capture midrange frequencies and project the sound to the front and center of the vehicle.

Pair it with a Digital Processor

The Alpine 30MC does not include a crossover, so for best results in music performance, pair the 30MC with the PXE-0850S advanced wireless digital signal processor or the new Alpine R-A90S 6CH amplifier.

Customise the the crossovers and make precise adjustments to the time correction for a well balanced response and proper centre sound stage.

Alpine 30MC Specifications:

  • Max RMS Power Capacity: 50W RMS
  • Peak Power Capacity: 150W RMS
  • Cone Material: Polypropylene
  • Magnet Type: Ferrite
  • Resonant Frequency Response: 125 Hz
  • X-max: 2.5mm
  • Frequency Response: 100Hz-20kHz
  • Sensitivity: 84dB (1W / 1m)
  • Nominal Impedance: 6 Ohm
  • Terminal Type: Male Quick Disconnects
  • Mounting Depth: 1 5/16-inch
  • Cutout Diameter: 2 1/2-inch
  • Outer Diameter: 3.1-inch
  • Crossover: (Not Included) DSP Recommended
  • Crossover Recommendation: BP Filter (Low = 250Hz @ -12dB/Oct) (High = 2.4kHz @ 12dB/Oct)


Sound Garage, your Car Stereo Specialist in the heart of North Lakes.


There are no reviews yet.

Be the first to review “Alpine 30MC 3-Inch Midrange Component Speakers”

Your email address will not be published.

related products that fit your ride
GME MB101B (38MM)
Aerpro APSBVWA 10" Integrated vehicle enclosure to suit Volkswagen Amarok
Aerpro FP9353K VF