GNET GN-P77 OBD Kit for Gnet System Dash Cams

OBD Kit for Gnet System Dash Cams for Parking Mode.

SKU: GN-P77

$59.00

Description

GNET GN-P77

OBD Power Cable

OBD Kit for Gnet System Dash Cams for Parking Mode

GNET GN-P77

OBD Power Cable Product details:

  • GNET GN-P77 OBD Kit for Gnet System Dash Cam in Parking Mode Plug and Play:
    • Monitor your vehicle while you are away 
    • Timer & voltage cut-off 
    • Battery protection 
    • Plug & Play

GNET GN-P77

  • Installation Specifications:
    • Quiescent current Rated current 1A, Max. 3A / Under 300µA Power cut-off voltage (based on the input voltage) 12V, 12.5V(±0.1V)/22.8V,23.2V(±0.1V) DC connector type DC 12 V-24 V (DC Plug: (-)–C–(+) (Ø3.5 x Ø1.35)
    • Cable length 5 meters (16.4 feet) OBD compatibility/requirements Compatible with most types of vehicles. OBD CAN bus* required.

 

  • PARKING MODE SWITCH ON: GN-P77 supplies your Dash Cam with power even if the ignition of the vehicle is turned off until it reaches voltage cut-off or timeout value. Parking Mode Switch OFF: GN-P77 supplies power to your dashcam only when the vehicle ignition is on.

 

  • LOW VOLTAGE CUT-OFF SETTINGS PROTECT YOUR BATTERY FROM DISCHARGE
    • When the vehicle’s ignition is off, GN-P77 checks your vehicle’s battery voltage periodically while powering your Dash Cam If power drops below the set cut-off level, GN-P77 automatically cuts power to the dashcam, thus saving your vehicle’s battery life.
    • Voltage cut-off: shuts down your dashcam if power drops to 11.8/12/12.5V.

 

  • TIMER CUT-OFF SETTINGS
    • Timer cut-off: set up a shutdown timer from 6 hours to infinity.
    • The timer function is only active when the vehicle’s ignition is off and automatically stops if the ignition is on.

 

  • Regardless of the timer setting, the power is cut as soon as the voltage drops below the configured voltage cut-off value.

 

  • Note: It May not be supported by some electric vehicles.

Specifications

  • Model Name GNET GN-P77
  • Output current / Quiescent current Rated current 1A, Max. 3A / Under 300µA
  • Power cut-off voltage (based on the input voltage) 12V, 12.5V(±0.1V)/22.8V,23.2V(±0.1V)
  • DC connector type DC 12 V-24 V (DC Plug: (-)–C–(+) (Ø3.5 x Ø1.35)
  • Cable length 5 meters (16.4 feet)
  • OBD compatibility/requirements Compatible with most types of vehicles.
  • OBD CAN bus* required. May not be supported by some electric vehicles.

Reviews

There are no reviews yet.

Be the first to review “GNET GN-P77 OBD Kit for Gnet System Dash Cams”

Your email address will not be published.

related products that fit your ride
THINKWARE U1000 4K-QHD-1ch Dash-Cam (128GB)
VIEW PRODUCT >
THINKWARE HWC
VIEW PRODUCT >
Kenwood STZ-RF200WD Motorcycle Dash Cam
VIEW PRODUCT >