Alpine HCE-C2600FD Front Multi-View Camera System

Front multiview parking camera.




Alpine HCE-C2600FD

Front Multi-View Camera System

The Alpine HCE-C2600FD front view camera is a compact device that seamlessly connects to the dedicated camera input on compatible Alpine Advanced Navigation Stations. This innovative camera solution from Alpine enhances visibility in front of your vehicle and when navigating out of blind spots or around obstructed corners. By providing a clearer view of your surroundings, this front-view camera makes maneuvering your vehicle easier and significantly improves overall safety and awareness on the road.

When paired with the Alpine HCE-C2100RD Rear View Camera, this dynamic duo can significantly enhance your situational awareness while off-roading or 4WDing. Experience a new level of confidence and peace of mind with these advanced camera systems from Alpine.

Featuring enhanced picture quality and a wider viewing angle, the Alpine HCE-C2600FD also provides automatic image adjustment with day and night mode, ensuring the picture is bright and clear. The included 3-metre extension cable and mounting plate will suit installation in almost any vehicle application.

Pair with an Alpine AV Receiver

The HCE-C2600FD is only compatible with a specific range of Alpine Audio-Visual receivers. This direct connection guarantees the highest picture quality, day or night. If you use the HCE-C2600FD with an older model receiver, you may require a KCX-C250MC Multi-Camera Selector interface (sold separately) to switch between images from different cameras seamlessly.


The new high-dynamic range (HDR) drive-assist cameras offer exceptional image quality in different lighting conditions. This innovative feature effectively eliminates the common issue of image wash-out when transitioning from heavily shaded areas to brightly sunlit areas.

Additionally, Multi-View provides a selection of viewing modes.

  • The corner view splits the screen so you can see both sides in front of the vehicle.
  • Ground view is convenient for parking and seeing obstacles in front of your car.
  • Front view allows you a clear panoramic view in front of your vehicle from a lower and more forward angle than your driver's seat.

Front View
Corner View
Ground View


  • High Dynamic Range (HDR) Front view Image
  • Video Signal (NTSC) Output
  • Multi-View Angle Selection: Panorama View [Panorama], Ground View [Top], Corner View [Corner]


  • Normal Image Output
  • Colour CMOS Image Sensor
  • Automatic Exposure Adjustment
  • Automatic White Balance Adjustment
  • Internal Synchronisation


  • Camera: 23.6 x 23.6 x 26.1mm (excluding projection on the rear)
  • Camera Cable Length: 1m
  • Camera Extension Cable Length: 3m


  • Power Requirement: 6.0V DC (5.0 to 9.0VDC allowable)
  • Ground Type: Negative Ground
  • Max. Power Consumption: 1.2W (6.0V)


  • Output Image: Normal image, CVBS (NTSC Video signal), for 16:9 wide-screen
  • Image Output Impedance: 75 Ohms (1Vp-p)
  • Image Sensor: 1/4″ Type Color CMOS Image Sensor, Aspect Ratio 16:9
  • Effective Number of Pixels: 1280 (horizontal) x 720 (vertical) approximately 1.2 Mega pixels
  • Lens: Focal Length: f=1.27mm
  • Lens: Brightness: F=1:1.8
  • Angle of Field: Horizontal = 180° , Vertical = 70°
  • S/N Ratio: 41 dB or more
  • Resolution (Horizontal. Center Area): 330 TV Lines
  • Operating Temperature: -30°C – +70°C
  • Illumination Range: Approximately 1.5Lx to 100kLx
  • Weight: 41g (including cable but not including bracket and screw


There are no reviews yet.

Be the first to review “Alpine HCE-C2600FD Front Multi-View Camera System”

Your email address will not be published. Required fields are marked *

related products that fit your ride
Alpine KCU-TSL21M3-1 Single Amplifier Connection Harness for 2022 Tesla Model 3
Alpine KAE-1DPLT - 1-DIN Halo9 Blanking Plate
Mongoose MC6N - NTSC Reverse Camera