Alpine Status HDA-F60 Hi-Res Audio 4 Channel Amplifier


Alpine Status HDA-F60

Hi-Res Audio 4-Channel Amplifier

Superior Sound Performance

Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extremely flexible: all components can be purchased and used in a “stand-alone” configuration.

If you want to build a full Alpine Status sound system with external amplifiers, we recommend the Alpine StatusClass-D amplifiers. These amps are developed to perfectly match the Alpine Status speakers and subwoofer for the best sound quality. There is a Mono power amplifier (HDA-M80), a 4-channel amplifier (HDA-F60) and a 5-channel amplifier (HDA-V90) with a dedicated high-power subwoofer channel.

All controls are conveniently located on the top side of the amplifiers, protected by a cover plate. This gives you easy access to HP / LP filters and frequency adjustments, gain controls and input channel selectors (different for each amplifier model).

Alpine Status HDA-F60 Hi-Res Audio 4 Channel Amplifier


Class-D 4-Channel Amplifier

The HDA-F60 4-Channel Power Amplifier features a Class-D amplification circuit with Sierra-H technology (see below for more details on Sierra-H). It features an RMS power output of 4x 100 Watts @ 4Ohm, 4x 150 Watts @ 2Ohm or 2x 300W @ 4Ohm bridged and a frequency response of 10Hz to 60kHz.



The all-new Alpine Status HDA-F60 4-channel amplifier boasts an advanced digital design with a copper-plated chassis and black circuit board, along with Alpine’s exclusive blue power indicator light seamlessly integrated within the centre of the amplifier for a premium finish.

SoundGarage - Hi-Res Audio


Alpine Status amplifiers feature many audiophile technologies and selected high-end components to reproduce excellent sound quality. A copper shield keeps electromagnetic interferences away from the black PCB board, to ensure the best audio reproduction. The Signal to noise ratio is >87dB (channel 1-4 1W into 4 Ohm) and >80dB (channel 5 1W into 4 Ohm).



After the original analog sound wave is converted to a digital signal and amplified, the Sierra-H circuit compares and corrects the amplified signal with the original waveform twice, to reproduce a highly accurate signal without any gaps.

Alpine Status_HDA-F60_One-Sided-Terminal


All connections (power supply, speaker outputs, RCA inputs/outputs and the remote bass knob connector), as well as all fuses, are located on the downside of the amplifier. This makes it much easier to achieve a clean installation in your vehicle. You can connect the AlpineRUX-KNOB2 for subwoofer level control (in bridged mode channel 3 + 4).

Alpine Status_HDA-V90_Thermal-Protection


Along with Alpine’s new intelligent amplifier platform, the new Alpine Status amplifiers feature an improved heat sink and protection circuit design that eliminates thermal shut-down, for dependable music playback.



All Alpine Status amplifiers feature power supply and speaker terminal connectors for easier installation and handling. The very compact connector design features screw terminals and allows clean and simple installation with lossless connectivity.



Alpine Status achieves 192kHz/24Bit playback, which is 6.5 times the amount of digital audio data in a standard CD or digital streaming service and exceeds the standard High-Resolution spec of 96kHz/24Bit found in most aftermarket sound solutions. This allows Alpine Status to capture and accurately reproduce details like the breath of the artist or a musician’s subtle interaction with an instrument. This capability not only reproduces music to the artist’s original intention but emulates the experience of a studio recording in the vehicle.

Sound Garage, your Authorised Alpine Status Dealer, Stockist and Installation Centre.

  • Channel Design: 4/3/2 Channel
  • Class-D amplification circuit
  • Power supply and speaker channel connectors
  • Copper-plated chassis
  • Top control panel (below top cover)
  • Black circuit board
  • Non-Shutdown design
  • Thermal Protection
  • One-sided terminal
  • Blue power LED
  • Compatible with RUX-KNOB2 bass controller

RMS Power Ratings

  • Per Channel into 2 Ohms, 14.4V: 4 x 150W
  • Per Channel into 4 Ohms, 14.4V: 4 x 100W
  • Bridged into 4 Ohms, 14.4V: 2 x 300W

Sound Tuning

  • Crossover: Variable HPF/LPF: 50-400Hz (-12dB/oct )


  • Input Sensitivity (RCA Input): Hi: 0.5V - 10V / Low: 0.2V - 4.0V
  • Frequency Response (+0/ -3dB: 1W into 4 Ohms): 10Hz – 60kHz
  • THD+N (@ 10W into 4 Ohms): <0.02%
  • Damping Factor (@ 10 W into 4 Ohms at 100 Hz): >500
  • Weight: 3.8kg


  • Width 291 mm
  • Height 53.5 mm
  • Depth 189.5 mm


There are no reviews yet.

Be the first to review “Alpine Status HDA-F60 Hi-Res Audio 4 Channel Amplifier”

Your email address will not be published. Required fields are marked *

related products that fit your ride
Alpine KCU-TSL22MY-1 Single Amplifier Connection Harness for 2022 Tesla Model Y
Alpine S-Series S-A60M Amplifier and 12″ Halo Subwoofer System
AudioControl PNW-4 4″ High-Fidelity Coaxial Speaker