Description

GNET GN-P77

OBD Power Cable

OBD Kit for Gnet System Dash Cams for Parking Mode

OBD Power Cable Product details:

• GNET GN-P77 OBD Kit for Gnet System Dash Cam in Parking Mode Plug and Play:
  • Monitor your vehicle while you are away 
  • Timer & voltage cut-off 
  • Battery protection 
  • Plug & Play

• Installation Specifications:
  • Quiescent current Rated current 1A, Max. 3A / Under 300µA Power cut-off voltage (based on the input voltage) 12V, 12.5V(±0.1V)/22.8V,23.2V(±0.1V) DC connector type DC 12 V-24 V (DC Plug: (-)–C–(+) (Ø3.5 x Ø1.35)
  • Cable length 5 meters (16.4 feet) OBD compatibility/requirements Compatible with most types of vehicles. OBD CAN bus* required.

• PARKING MODE SWITCH ON: GN-P77 supplies your Dash Cam with power even if the ignition of the vehicle is turned off until it reaches voltage cut-off or timeout value. Parking Mode Switch OFF: GN-P77 supplies power to your dashcam only when the vehicle ignition is on.

• LOW VOLTAGE CUT-OFF SETTINGS PROTECT YOUR BATTERY FROM DISCHARGE
  • When the vehicle’s ignition is off, GN-P77 checks your vehicle’s battery voltage periodically while powering your Dash Cam If power drops below the set cut-off level, GN-P77 automatically cuts power to the dashcam, thus saving your vehicle’s battery life.
  • Voltage cut-off: shuts down your dashcam if power drops to 11.8/12/12.5V.

• TIMER CUT-OFF SETTINGS
  • Timer cut-off: set up a shutdown timer from 6 hours to infinity.
  • The timer function is only active when the vehicle’s ignition is off and automatically stops if the ignition is on.

• Regardless of the timer setting, the power is cut as soon as the voltage drops below the configured voltage cut-off value.

• Note: It May not be supported by some electric vehicles.