Description

Mongoose MPR-R

RUBBER REAR PARKING SENSORS (SURFACE MOUNT)

These sensors are rubber housed for durability and can be mounted in painted metal bumpers.

• Rubber outer sensor headshells
• Bevelled sensor lip to enable correct installation angle
• Automatically switch on when reverse gear selected
• 4 bumper-mounted sensors
• Detachable heads for easy service or vehicle repair
• Control module - 2 wire installation
• Super loud buzzer
• 21mm plastic bumper hole cutting tool
• Finished in matt black - painting not recommended

Note: Reversing sensors are a driving aid and the usual driving precautions should be taken whilst reversing. Sensors may not detect all possible objects/obstructions. Detection distances are approximate.

* The cut edge of metal bumpers must be painted to prevent rust.
 Not recommended for chrome bumpers due to potential rust and peeling of the chrome at the cut edge.

Audible Warnings

• At approx' 2.0~1.8 metres, the buzzer starts to sound slowly
• As you get closer the buzzer sounds faster
• At approx' 0.50 metres the buzzer sounds constantly........stop!

*Detection distances vary according to fitted height and obstacles being detected

Note: Reversing sensors are a driving aid and the usual driving precautions should be taken whilst reversing. Sensors may not detect all possible objects/obstructions. Detection distances are approximate.

* The cut edge of metal bumpers must be painted to prevent rust.
 Not recommended for chrome bumpers due to potential rust and peeling of the chrome at the cut edge.